How to assemble Alix enclosure.

In this document You can see how to assemble Alix enclosure.

  • 1. Atter removing the hex nuts from DB9 connector(serial port) of ALIX board as shown above picture, mount ALIX board in enclosure.
  • 2. Fasten the hex nuts back to DB9 connector(serial port) of ALIX board.
  • 3. Fasten Alix board to enclosure with four round head screws.
  • 4. Slide the top plate into the lower plate from the front end of the lower plate.
  • 5. Fasten top and lower plate with plain head screws.Do not overtightened. The screw hole can be broken.
  • 6. Close the unused holes with rubber plugs.

Go back to "Getting Started"